Dishwasher — removed filter will not seat
Refit only the filter specified for your model.
Difficulty
Easy
Time
5–25 min
Cost
—
Symptoms
- filter protrudes after cleaning
Possible causes
1Misaligned filter or residue in its seat
Less likelyThis is a possible explanation, not a confirmed diagnosis. Compare it with the safe checks below.
- Switch off and allow cooling. Compare the filter and markings with the manual. Do not reach into the pump or under its cover.
Initial checks
- Switch off and allow cooling. Compare the filter and markings with the manual. Do not reach into the pump or under its cover.
- Remove accessible residue with a soft brush without pushing it into the drain. Leave glass and sharp debris to service staff.
- Insert the assembly and turn only as instructed. Check alignment marks. Do not run without a locked filter.
Step-by-step repair instructions
- 1
Prepare a safe place

Reference diagram. The marker shows an example inspection area. Follow your model's manual. 
Conceptual illustration. Follow the text and your model's manual. Stop the appliance. Clean it only after safely disconnecting power and allowing it to cool. Identify user-serviceable parts in the model's manual.
Expected result: You understand the model instructions and can safely perform the listed tasks.
About 3 min
Stop if: The model, access or safe preparation is unclear.
- 2
Compare the parts

Reference diagram. The marker shows an example inspection area. Follow your model's manual. 
Conceptual illustration. Follow the text and your model's manual. Switch off and allow cooling. Compare the filter and markings with the manual. Do not reach into the pump or under its cover.
Expected result: You know the correct assembly order.
About 4 min
Stop if: The filter or screen is cracked.
- 3
Clean the seat only

Reference diagram. The marker shows an example inspection area. Follow your model's manual. 
Conceptual illustration. Follow the text and your model's manual. Remove accessible residue with a soft brush without pushing it into the drain. Leave glass and sharp debris to service staff.
Expected result: The seat edge is unobstructed.
About 4 min
Stop if: There is glass or access is unsafe.
- 4
Align the markings

Reference diagram. The marker shows an example inspection area. Follow your model's manual. 
Conceptual illustration. Follow the text and your model's manual. Insert the assembly and turn only as instructed. Check alignment marks. Do not run without a locked filter.
Expected result: The filter sits level and is secured.
About 4 min
Stop if: Turning needs force or the part still protrudes.
- 5
Check the outcome and save your notes

Reference diagram. The marker shows an example inspection area. Follow your model's manual. 
Conceptual illustration. Follow the text and your model's manual. Restore parts to their normal position as instructed. Perform one brief, safe check. Note what changed after each task; if the fault remains, give a technician the model and a photo of the symptom.
Expected result: The symptom has stopped or you have clear notes for a technician.
About 3 min
Stop if: A damaged seat or incompatible filter requires the correct part and service.
When should you call a professional?
A damaged seat or incompatible filter requires the correct part and service.
Does your situation look different?
Take a photo — FIXIT will assess your fault and suggest checks for your situation.
Check your problemThis guide is for information only. If unsure, get professional help. In an emergency, call 112.