Wipers — streaks on the windscreen
Check the glass and accessible blade rubber without adjusting the mechanism. Match any replacement blade to the vehicle.
Difficulty
Easy
Time
5–25 min
Cost
—
Symptoms
- wiper leaves streaks
- dirty blade rubber
Possible causes
1Dirty glass
Less likelyThis is a possible explanation, not a confirmed diagnosis. Compare it with the safe checks below.
- Clean the outer glass with an approved automotive glass cleaner. Remove loose grit before wiping.
2Residue on blade rubber
Less likelyThis is a possible explanation, not a confirmed diagnosis. Compare it with the safe checks below.
- Find the service-position procedure in the manual. Gently wipe accessible rubber; never force the arm upward.
3Worn blade edge
Less likelyThis is a possible explanation, not a confirmed diagnosis. Compare it with the safe checks below.
- Return the arms to their normal position and briefly test on wet glass while parked. Do not operate wipers on dry glass.
Initial checks
- Clean the outer glass with an approved automotive glass cleaner. Remove loose grit before wiping.
- Find the service-position procedure in the manual. Gently wipe accessible rubber; never force the arm upward.
- Return the arms to their normal position and briefly test on wet glass while parked. Do not operate wipers on dry glass.
Step-by-step repair instructions
- 1
Prepare a safe place

Conceptual illustration. Follow the text and your model's manual. Park away from traffic, apply the parking brake and switch off the ignition. Never adjust anything while driving. Let accessible parts cool.
Expected result: You understand the model instructions and can safely perform the listed tasks.
About 3 min
Stop if: The model, access or safe preparation is unclear.
- 2
Clean the glass

Conceptual illustration. Follow the text and your model's manual. Clean the outer glass with an approved automotive glass cleaner. Remove loose grit before wiping.
Expected result: The glass is free of loose dirt.
About 4 min
Stop if: The glass is cracked or iced over.
- 3
Inspect the rubber

Conceptual illustration. Follow the text and your model's manual. Find the service-position procedure in the manual. Gently wipe accessible rubber; never force the arm upward.
Expected result: The edge is clean and can be inspected.
About 4 min
Stop if: The rubber is torn or the arm will not hold its position.
- 4
Check on wet glass

Conceptual illustration. Follow the text and your model's manual. Return the arms to their normal position and briefly test on wet glass while parked. Do not operate wipers on dry glass.
Expected result: You can distinguish dirt from blade wear.
About 4 min
Stop if: Visibility remains inadequate for driving.
- 5
Check the outcome and save your notes

Conceptual illustration. Follow the text and your model's manual. Restore parts to their normal position as instructed. Perform one brief, safe check. Note what changed after each task; if the fault remains, give a technician the model and a photo of the symptom.
Expected result: The symptom has stopped or you have clear notes for a technician.
About 3 min
Stop if: Persistent streaking, a loose arm or abnormal mechanism movement requires service. Do not drive without adequate visibility.
When should you call a professional?
Persistent streaking, a loose arm or abnormal mechanism movement requires service. Do not drive without adequate visibility.
Does your situation look different?
Take a photo — FIXIT will assess your fault and suggest checks for your situation.
Check your problemThis guide is for information only. If unsure, get professional help. In an emergency, call 112.