Drill driver — clutch stops driving early
Check the setting on a suitable practice piece.
Difficulty
Easy
Time
5–25 min
Cost
—
Symptoms
- driver clicks without tightening
Possible causes
1Incorrect clutch setting
Less likelyThis is a possible explanation, not a confirmed diagnosis. Compare it with the safe checks below.
- Switch off and disconnect power. Identify the clutch ring and driving mode in the manual. Inspect the bit.
Initial checks
- Switch off and disconnect power. Identify the clutch ring and driving mode in the manual. Inspect the bit.
- Select driving mode and low torque. Use the correct bit. Do not use drilling mode for delicate tightening.
- Test briefly on a stable practice piece. Increase gradually only within the permitted range. Avoid electronics or furniture with hidden services.
Step-by-step repair instructions
- 1
Prepare a safe place

Reference diagram. The marker shows an example inspection area. Follow your model's manual. 
Conceptual illustration. Follow the text and your model's manual. Switch off the tool and unplug it or remove its battery as instructed. Keep away from blades. Work only on parts identified as user-serviceable.
Expected result: You understand the model instructions and can safely perform the listed tasks.
About 3 min
Stop if: The model, access or safe preparation is unclear.
- 2
Remove the battery

Reference diagram. The marker shows an example inspection area. Follow your model's manual. 
Conceptual illustration. Follow the text and your model's manual. Switch off and disconnect power. Identify the clutch ring and driving mode in the manual. Inspect the bit.
Expected result: You identify the control.
About 4 min
Stop if: The bit is chipped or chuck loose.
- 3
Choose a low setting

Reference diagram. The marker shows an example inspection area. Follow your model's manual. 
Conceptual illustration. Follow the text and your model's manual. Select driving mode and low torque. Use the correct bit. Do not use drilling mode for delicate tightening.
Expected result: The tool is configured for driving.
About 4 min
Stop if: Markings cannot be identified.
- 4
Compare on a practice piece

Reference diagram. The marker shows an example inspection area. Follow your model's manual. 
Conceptual illustration. Follow the text and your model's manual. Test briefly on a stable practice piece. Increase gradually only within the permitted range. Avoid electronics or furniture with hidden services.
Expected result: The clutch disengages at the intended resistance.
About 4 min
Stop if: The tool heats up or mechanism jams.
- 5
Check the outcome and save your notes

Reference diagram. The marker shows an example inspection area. Follow your model's manual. 
Conceptual illustration. Follow the text and your model's manual. Restore parts to their normal position as instructed. Perform one brief, safe check. Note what changed after each task; if the fault remains, give a technician the model and a photo of the symptom.
Expected result: The symptom has stopped or you have clear notes for a technician.
About 3 min
Stop if: A faulty clutch or mechanical knocking requires service. Do not bypass the limiter.
When should you call a professional?
A faulty clutch or mechanical knocking requires service. Do not bypass the limiter.
Does your situation look different?
Take a photo — FIXIT will assess your fault and suggest checks for your situation.
Check your problemThis guide is for information only. If unsure, get professional help. In an emergency, call 112.