FiXITAI
All guides
ToolsLow risk

Screwdriver — tip does not fit the screw head

Match the profile without damaging the screw head.

Difficulty

Easy

Time

5–25 min

Cost

—

Symptoms

  • screwdriver slips out of the recess

Possible causes

  1. 1Wrong tip profile or size

    Less likely

    This is a possible explanation, not a confirmed diagnosis. Compare it with the safe checks below.

    • Switch off and disconnect the item. Confirm the screw is a user-serviceable fixing.

Initial checks

  • Switch off and disconnect the item. Confirm the screw is a user-serviceable fixing.
  • Remove loose external dirt and compare PH, PZ, Torx or slotted profiles with the tool marking. Do not hammer in a tip.
  • Seat the tip straight without applying torque. The correct size has no excessive play. Tighten only as instructed.

Step-by-step repair instructions

  1. 1

    Prepare a safe place

    Prepare a safe place
    Reference diagram. The marker shows an example inspection area. Follow your model's manual.
    Conceptual task illustration; not your device
    Conceptual illustration. Follow the text and your model's manual.

    Switch off the tool and unplug it or remove its battery as instructed. Keep away from blades. Work only on parts identified as user-serviceable.

    Expected result: You understand the model instructions and can safely perform the listed tasks.

    About 3 min

    Stop if: The model, access or safe preparation is unclear.

  2. 2

    Secure the item

    Secure the item
    Reference diagram. The marker shows an example inspection area. Follow your model's manual.
    Conceptual task illustration; not your device
    Conceptual illustration. Follow the text and your model's manual.

    Switch off and disconnect the item. Confirm the screw is a user-serviceable fixing.

    Expected result: The item is stable and disconnected.

    About 4 min

    Stop if: The screw retains a guard or live component.

  3. 3

    Identify the recess

    Identify the recess
    Reference diagram. The marker shows an example inspection area. Follow your model's manual.
    Conceptual task illustration; not your device
    Conceptual illustration. Follow the text and your model's manual.

    Remove loose external dirt and compare PH, PZ, Torx or slotted profiles with the tool marking. Do not hammer in a tip.

    Expected result: The tip matches the recess.

    About 4 min

    Stop if: The head is cracked or badly stripped.

  4. 4

    Check fit by hand

    Check fit by hand
    Reference diagram. The marker shows an example inspection area. Follow your model's manual.
    Conceptual task illustration; not your device
    Conceptual illustration. Follow the text and your model's manual.

    Seat the tip straight without applying torque. The correct size has no excessive play. Tighten only as instructed.

    Expected result: The tool seats securely.

    About 4 min

    Stop if: High force is needed or the head strips.

  5. 5

    Check the outcome and save your notes

    Check the outcome and save your notes
    Reference diagram. The marker shows an example inspection area. Follow your model's manual.
    Conceptual task illustration; not your device
    Conceptual illustration. Follow the text and your model's manual.

    Restore parts to their normal position as instructed. Perform one brief, safe check. Note what changed after each task; if the fault remains, give a technician the model and a photo of the symptom.

    Expected result: The symptom has stopped or you have clear notes for a technician.

    About 3 min

    Stop if: Refer seized or damaged fixings to a professional. Do not use arbitrary impact force.

When should you call a professional?

Refer seized or damaged fixings to a professional. Do not use arbitrary impact force.

Does your situation look different?

Take a photo — FIXIT will assess your fault and suggest checks for your situation.

Check your problem

This guide is for information only. If unsure, get professional help. In an emergency, call 112.