Water timer — display fails after battery replacement
Check the dry battery compartment without opening the valve.
Difficulty
Easy
Time
5–25 min
Cost
—
Symptoms
- tap timer shows no time
Possible causes
1Wrong battery type or improperly closed cover
Less likelyThis is a possible explanation, not a confirmed diagnosis. Compare it with the safe checks below.
- Close water and identify the required battery type. Dry the exterior before opening the compartment.
Initial checks
- Close water and identify the required battery type. Dry the exterior before opening the compartment.
- Fit a new specified battery with correct polarity. Do not substitute a different voltage or bridge contacts.
- Close the sealed cover as instructed. Set time and check the schedule before restoring water. Supervise the new configuration.
Step-by-step repair instructions
- 1
Prepare a safe place

Reference diagram. The marker shows an example inspection area. Follow your model's manual. 
Conceptual illustration. Follow the text and your model's manual. Stop garden equipment and disconnect its energy source as instructed. Do not reach under guards or near blades. Choose a dry, stable place.
Expected result: You understand the model instructions and can safely perform the listed tasks.
About 3 min
Stop if: The model, access or safe preparation is unclear.
- 2
Close the tap

Reference diagram. The marker shows an example inspection area. Follow your model's manual. 
Conceptual illustration. Follow the text and your model's manual. Close water and identify the required battery type. Dry the exterior before opening the compartment.
Expected result: The exterior is dry.
About 4 min
Stop if: There is water or battery leakage inside.
- 3
Fit the correct battery

Reference diagram. The marker shows an example inspection area. Follow your model's manual. 
Conceptual illustration. Follow the text and your model's manual. Fit a new specified battery with correct polarity. Do not substitute a different voltage or bridge contacts.
Expected result: The battery is correctly fitted.
About 4 min
Stop if: Contacts are corroded.
- 4
Check time before scheduling

Reference diagram. The marker shows an example inspection area. Follow your model's manual. 
Conceptual illustration. Follow the text and your model's manual. Close the sealed cover as instructed. Set time and check the schedule before restoring water. Supervise the new configuration.
Expected result: Display and schedule respond.
About 4 min
Stop if: The display fails or cover will not close.
- 5
Check the outcome and save your notes

Reference diagram. The marker shows an example inspection area. Follow your model's manual. 
Conceptual illustration. Follow the text and your model's manual. Restore parts to their normal position as instructed. Perform one brief, safe check. Note what changed after each task; if the fault remains, give a technician the model and a photo of the symptom.
Expected result: The symptom has stopped or you have clear notes for a technician.
About 3 min
Stop if: A wet or damaged timer needs service. Leave water shut off.
When should you call a professional?
A wet or damaged timer needs service. Leave water shut off.
Does your situation look different?
Take a photo — FIXIT will assess your fault and suggest checks for your situation.
Check your problemThis guide is for information only. If unsure, get professional help. In an emergency, call 112.