Remote — dirty contacts after battery removal
Inspect only the accessible compartment without touching leakage.
Difficulty
Easy
Time
5–25 min
Cost
—
Symptoms
- remote fails after changing batteries
Possible causes
1Incorrect polarity or damaged contacts
Less likelyThis is a possible explanation, not a confirmed diagnosis. Compare it with the safe checks below.
- Remove batteries as instructed. Look for white deposits, moisture and cracks. Do not touch residue or blow into the compartment.
Initial checks
- Remove batteries as instructed. Look for white deposits, moisture and cracks. Do not touch residue or blow into the compartment.
- If dry and clean, fit a new matching set using polarity marks. Do not mix old and new cells.
- Close the cover and point at the receiver. Test one button. Do not bridge contacts with metal.
Step-by-step repair instructions
- 1
Prepare a safe place

Reference diagram. The marker shows an example inspection area. Follow your model's manual. 
Conceptual illustration. Follow the text and your model's manual. Find the manual and model identifier. Photograph the initial condition. Start with reversible checks that do not open the casing or require force.
Expected result: You understand the model instructions and can safely perform the listed tasks.
About 3 min
Stop if: The model, access or safe preparation is unclear.
- 2
Remove power

Reference diagram. The marker shows an example inspection area. Follow your model's manual. 
Conceptual illustration. Follow the text and your model's manual. Remove batteries as instructed. Look for white deposits, moisture and cracks. Do not touch residue or blow into the compartment.
Expected result: You know whether the compartment is clean.
About 4 min
Stop if: There is leakage, corrosion or a hot battery.
- 3
Check type and polarity

Reference diagram. The marker shows an example inspection area. Follow your model's manual. 
Conceptual illustration. Follow the text and your model's manual. If dry and clean, fit a new matching set using polarity marks. Do not mix old and new cells.
Expected result: Cells match the markings.
About 4 min
Stop if: A spring is broken or a cell does not fit.
- 4
Test a key

Reference diagram. The marker shows an example inspection area. Follow your model's manual. 
Conceptual illustration. Follow the text and your model's manual. Close the cover and point at the receiver. Test one button. Do not bridge contacts with metal.
Expected result: The remote responds normally.
About 4 min
Stop if: Cells heat up or the remote does not respond.
- 5
Check the outcome and save your notes

Reference diagram. The marker shows an example inspection area. Follow your model's manual. 
Conceptual illustration. Follow the text and your model's manual. Restore parts to their normal position as instructed. Perform one brief, safe check. Note what changed after each task; if the fault remains, give a technician the model and a photo of the symptom.
Expected result: The symptom has stopped or you have clear notes for a technician.
About 3 min
Stop if: Ask the manufacturer about leakage and corrosion. Use an appropriate battery collection point.
When should you call a professional?
Ask the manufacturer about leakage and corrosion. Use an appropriate battery collection point.
Does your situation look different?
Take a photo — FIXIT will assess your fault and suggest checks for your situation.
Check your problemThis guide is for information only. If unsure, get professional help. In an emergency, call 112.