TV — no picture from an HDMI device
Check the selected input, external cable and source-device power without opening casings.
Difficulty
Easy
Time
5–25 min
Cost
—
Symptoms
- TV shows no HDMI signal
- TV menu works but the set-top box does not
Possible causes
1A different HDMI input is selected
Less likelyThis is a possible explanation, not a confirmed diagnosis. Compare it with the safe checks below.
- Match the socket label to the input selected with the remote. Do not move a heavy TV alone.
2The source device is inactive
Less likelyThis is a possible explanation, not a confirmed diagnosis. Compare it with the safe checks below.
- Check the normal power indicator on the set-top box or console. With equipment off, reseat the external HDMI connection.
3Damaged or incompatible cable
Less likelyThis is a possible explanation, not a confirmed diagnosis. Compare it with the safe checks below.
- If available, try a working compatible cable without a splitter. If the TV menu works, note which sources lack a picture.
Initial checks
- Match the socket label to the input selected with the remote. Do not move a heavy TV alone.
- Check the normal power indicator on the set-top box or console. With equipment off, reseat the external HDMI connection.
- If available, try a working compatible cable without a splitter. If the TV menu works, note which sources lack a picture.
Step-by-step repair instructions
- 1
Prepare a safe place

Conceptual illustration. Follow the text and your model's manual. Find the manual and model identifier. Photograph the initial condition. Start with reversible checks that do not open the casing or require force.
Expected result: You understand the model instructions and can safely perform the listed tasks.
About 3 min
Stop if: The model, access or safe preparation is unclear.
- 2
Read the input number

Conceptual illustration. Follow the text and your model's manual. Match the socket label to the input selected with the remote. Do not move a heavy TV alone.
Expected result: The selected input matches the cable.
About 4 min
Stop if: Access could tip the TV over.
- 3
Check the source and cable

Conceptual illustration. Follow the text and your model's manual. Check the normal power indicator on the set-top box or console. With equipment off, reseat the external HDMI connection.
Expected result: Plugs are seated without strain.
About 4 min
Stop if: A connector is hot, loose or damaged.
- 4
Compare a compatible connection

Conceptual illustration. Follow the text and your model's manual. If available, try a working compatible cable without a splitter. If the TV menu works, note which sources lack a picture.
Expected result: You know whether the source or cable affects the fault.
About 4 min
Stop if: The TV menu also has no picture.
- 5
Check the outcome and save your notes

Conceptual illustration. Follow the text and your model's manual. Restore parts to their normal position as instructed. Perform one brief, safe check. Note what changed after each task; if the fault remains, give a technician the model and a photo of the symptom.
Expected result: The symptom has stopped or you have clear notes for a technician.
About 3 min
Stop if: No menu picture, damaged ports or failure with several working sources requires service.
When should you call a professional?
No menu picture, damaged ports or failure with several working sources requires service.
Does your situation look different?
Take a photo — FIXIT will assess your fault and suggest checks for your situation.
Check your problemThis guide is for information only. If unsure, get professional help. In an emergency, call 112.