Basin — slow drainage at the strainer
Remove accessible hair and residue at the strainer without disconnecting pipes or mixing drain chemicals.
Difficulty
Easy
Time
5–25 min
Cost
—
Symptoms
- water drains slowly from the basin
- hair on the drain strainer
Possible causes
1Hair on the accessible strainer
Less likelyThis is a possible explanation, not a confirmed diagnosis. Compare it with the safe checks below.
- Check whether drain chemicals were used. If they were or you are unsure, do not reach in or add another product.
2Residue around the stopper
Less likelyThis is a possible explanation, not a confirmed diagnosis. Compare it with the safe checks below.
- With gloves, remove only loose hair from the accessible strainer. Remove the stopper only as instructed; do not push objects deeper.
3A blockage deeper in the plumbing
Less likelyThis is a possible explanation, not a confirmed diagnosis. Compare it with the safe checks below.
- Test with a small amount of lukewarm water. Do not fill the basin or use boiling water unless the manufacturer permits it.
Initial checks
- Check whether drain chemicals were used. If they were or you are unsure, do not reach in or add another product.
- With gloves, remove only loose hair from the accessible strainer. Remove the stopper only as instructed; do not push objects deeper.
- Test with a small amount of lukewarm water. Do not fill the basin or use boiling water unless the manufacturer permits it.
Step-by-step repair instructions
- 1
Prepare a safe place

Conceptual illustration. Follow the text and your model's manual. Locate the water shut-off. If a task requires disconnecting a part, shut off the water and release pressure as instructed first. Do not work around water near electrical equipment.
Expected result: You understand the model instructions and can safely perform the listed tasks.
About 3 min
Stop if: The model, access or safe preparation is unclear.
- 2
Check previous chemical use

Conceptual illustration. Follow the text and your model's manual. Check whether drain chemicals were used. If they were or you are unsure, do not reach in or add another product.
Expected result: The strainer surface can be assessed safely.
About 4 min
Stop if: Active drain chemicals may be present.
- 3
Remove accessible debris

Conceptual illustration. Follow the text and your model's manual. With gloves, remove only loose hair from the accessible strainer. Remove the stopper only as instructed; do not push objects deeper.
Expected result: The visible drain surface is clear.
About 4 min
Stop if: Sharp objects are visible or plumbing needs dismantling.
- 4
Test with a small amount of water

Conceptual illustration. Follow the text and your model's manual. Test with a small amount of lukewarm water. Do not fill the basin or use boiling water unless the manufacturer permits it.
Expected result: Water drains or the blockage remains for assessment.
About 4 min
Stop if: Water backs up from another outlet or a leak appears.
- 5
Check the outcome and save your notes

Conceptual illustration. Follow the text and your model's manual. Restore parts to their normal position as instructed. Perform one brief, safe check. Note what changed after each task; if the fault remains, give a technician the model and a photo of the symptom.
Expected result: The symptom has stopped or you have clear notes for a technician.
About 3 min
Stop if: Backflow, blockage after chemical use or no improvement requires a plumber. Tell them which products were used.
When should you call a professional?
Backflow, blockage after chemical use or no improvement requires a plumber. Tell them which products were used.
Does your situation look different?
Take a photo — FIXIT will assess your fault and suggest checks for your situation.
Check your problemThis guide is for information only. If unsure, get professional help. In an emergency, call 112.