Shower head — weak spray
Compare flow with another outlet and clean only parts approved for user maintenance.
Difficulty
Easy
Time
5–25 min
Cost
—
Symptoms
- only some spray holes work
- uneven shower-head spray
Possible causes
1Deposits on the nozzles
Less likelyThis is a possible explanation, not a confirmed diagnosis. Compare it with the safe checks below.
- Check whether only the shower or another tap is affected. Do not adjust building-wide plumbing controls.
2Kinked hose
Less likelyThis is a possible explanation, not a confirmed diagnosis. Compare it with the safe checks below.
- Check hose bends and visible deposits. Rub flexible nozzles only if the manual permits it.
3Restricted supply before the head
Less likelyThis is a possible explanation, not a confirmed diagnosis. Compare it with the safe checks below.
- Use the product, contact time and method specified for the coating. Do not mix cleaners or drill out nozzles.
Initial checks
- Check whether only the shower or another tap is affected. Do not adjust building-wide plumbing controls.
- Check hose bends and visible deposits. Rub flexible nozzles only if the manual permits it.
- Use the product, contact time and method specified for the coating. Do not mix cleaners or drill out nozzles.
Step-by-step repair instructions
- 1
Prepare a safe place

Conceptual illustration. Follow the text and your model's manual. Locate the water shut-off. If a task requires disconnecting a part, shut off the water and release pressure as instructed first. Do not work around water near electrical equipment.
Expected result: You understand the model instructions and can safely perform the listed tasks.
About 3 min
Stop if: The model, access or safe preparation is unclear.
- 2
Compare the flow

Conceptual illustration. Follow the text and your model's manual. Check whether only the shower or another tap is affected. Do not adjust building-wide plumbing controls.
Expected result: You know whether the problem is local.
About 4 min
Stop if: Several outlets suddenly lose water or a leak is visible.
- 3
Inspect the hose and nozzles

Conceptual illustration. Follow the text and your model's manual. Check hose bends and visible deposits. Rub flexible nozzles only if the manual permits it.
Expected result: Kinks and loose deposits are removed.
About 4 min
Stop if: The hose is cracked or hot water appears uncontrollably.
- 4
Choose an approved descaling method

Conceptual illustration. Follow the text and your model's manual. Use the product, contact time and method specified for the coating. Do not mix cleaners or drill out nozzles.
Expected result: Nozzles are rinsed and the spray is more even.
About 4 min
Stop if: Cleaning requires dismantling the mixer or installation.
- 5
Check the outcome and save your notes

Conceptual illustration. Follow the text and your model's manual. Restore parts to their normal position as instructed. Perform one brief, safe check. Note what changed after each task; if the fault remains, give a technician the model and a photo of the symptom.
Expected result: The symptom has stopped or you have clear notes for a technician.
About 3 min
Stop if: Persistent pressure loss, leakage or temperature-control problems require a plumber.
When should you call a professional?
Persistent pressure loss, leakage or temperature-control problems require a plumber.
Does your situation look different?
Take a photo — FIXIT will assess your fault and suggest checks for your situation.
Check your problemThis guide is for information only. If unsure, get professional help. In an emergency, call 112.