Parking sensors — dirty surfaces
Clean visible sensor surfaces without removing sensors. They never replace the driver's observation of the surroundings.
Difficulty
Easy
Time
5–25 min
Cost
—
Symptoms
- sensor beeps after becoming dirty
- snow covers parking sensors
Possible causes
1Mud or snow on the surface
Less likelyThis is a possible explanation, not a confirmed diagnosis. Compare it with the safe checks below.
- With the vehicle safely parked, inspect sensors identified in the manual. Look for mud, snow or accessories covering them.
2An object in the sensor's field
Less likelyThis is a possible explanation, not a confirmed diagnosis. Compare it with the safe checks below.
- Remove loose snow and wipe with a soft damp cloth. Do not scrape, heat or direct a strong water jet at the sensor.
3Damaged sensor or mounting
Less likelyThis is a possible explanation, not a confirmed diagnosis. Compare it with the safe checks below.
- After normal vehicle start-up, read the system message as instructed. Never test detection by driving towards a person or obstacle.
Initial checks
- With the vehicle safely parked, inspect sensors identified in the manual. Look for mud, snow or accessories covering them.
- Remove loose snow and wipe with a soft damp cloth. Do not scrape, heat or direct a strong water jet at the sensor.
- After normal vehicle start-up, read the system message as instructed. Never test detection by driving towards a person or obstacle.
Step-by-step repair instructions
- 1
Prepare a safe place

Conceptual illustration. Follow the text and your model's manual. Park away from traffic, apply the parking brake and switch off the ignition. Never adjust anything while driving. Let accessible parts cool.
Expected result: You understand the model instructions and can safely perform the listed tasks.
About 3 min
Stop if: The model, access or safe preparation is unclear.
- 2
Inspect the surface

Conceptual illustration. Follow the text and your model's manual. With the vehicle safely parked, inspect sensors identified in the manual. Look for mud, snow or accessories covering them.
Expected result: You have identified visible dirt or an obstruction.
About 4 min
Stop if: A sensor is pushed in, loose or cracked.
- 3
Clean gently

Conceptual illustration. Follow the text and your model's manual. Remove loose snow and wipe with a soft damp cloth. Do not scrape, heat or direct a strong water jet at the sensor.
Expected result: The surfaces are uncovered and clean.
About 4 min
Stop if: Cleaning requires force or disassembly.
- 4
Read the message

Conceptual illustration. Follow the text and your model's manual. After normal vehicle start-up, read the system message as instructed. Never test detection by driving towards a person or obstacle.
Expected result: You have the message text and know whether the fault remains.
About 4 min
Stop if: The warning persists or the system behaves unpredictably.
- 5
Check the outcome and save your notes

Conceptual illustration. Follow the text and your model's manual. Restore parts to their normal position as instructed. Perform one brief, safe check. Note what changed after each task; if the fault remains, give a technician the model and a photo of the symptom.
Expected result: The symptom has stopped or you have clear notes for a technician.
About 3 min
Stop if: Persistent errors, impact damage or uneven mounting require diagnosis. Park using full observation of the surroundings.
When should you call a professional?
Persistent errors, impact damage or uneven mounting require diagnosis. Park using full observation of the surroundings.
Does your situation look different?
Take a photo — FIXIT will assess your fault and suggest checks for your situation.
Check your problemThis guide is for information only. If unsure, get professional help. In an emergency, call 112.