FiXITAI
All guides
HomeLow risk

Shower enclosure — deposits on glass

Match cleaning to the glass coating and protect surrounding surfaces. Never mix cleaning products.

Difficulty

Easy

Time

5–25 min

Cost

—

Symptoms

  • white marks on the enclosure
  • glass looks dull from deposits

Possible causes

  1. 1Mineral deposits from water

    Less likely

    This is a possible explanation, not a confirmed diagnosis. Compare it with the safe checks below.

    • Read the enclosure care instructions. Choose one product approved for the glass, seals and any protective coating.
  2. 2Soap residue

    Less likely

    This is a possible explanation, not a confirmed diagnosis. Compare it with the safe checks below.

    • Ventilate the bathroom, use the protection specified on the label and test a small inconspicuous area. Do not use sharp scrapers.
  3. 3Damaged surface coating

    Less likely

    This is a possible explanation, not a confirmed diagnosis. Compare it with the safe checks below.

    • Clean with a soft sponge for the labelled time. Rinse thoroughly and dry with a squeegee. Do not apply another product over residue from the first.

Initial checks

  • Read the enclosure care instructions. Choose one product approved for the glass, seals and any protective coating.
  • Ventilate the bathroom, use the protection specified on the label and test a small inconspicuous area. Do not use sharp scrapers.
  • Clean with a soft sponge for the labelled time. Rinse thoroughly and dry with a squeegee. Do not apply another product over residue from the first.

Step-by-step repair instructions

  1. 1

    Prepare a safe place

    Conceptual task illustration; not your device
    Conceptual illustration. Follow the text and your model's manual.

    Find the manual and model identifier. Photograph the initial condition. Start with reversible checks that do not open the casing or require force.

    Expected result: You understand the model instructions and can safely perform the listed tasks.

    About 3 min

    Stop if: The model, access or safe preparation is unclear.

  2. 2

    Identify the coating

    Conceptual task illustration; not your device
    Conceptual illustration. Follow the text and your model's manual.

    Read the enclosure care instructions. Choose one product approved for the glass, seals and any protective coating.

    Expected result: You know which product and contact time are permitted.

    About 4 min

    Stop if: The glass is cracked or chipped.

  3. 3

    Test a small area

    Conceptual task illustration; not your device
    Conceptual illustration. Follow the text and your model's manual.

    Ventilate the bathroom, use the protection specified on the label and test a small inconspicuous area. Do not use sharp scrapers.

    Expected result: The test does not change the surface colour or finish.

    About 4 min

    Stop if: There is irritation, strong fumes or a change to the coating.

  4. 4

    Rinse and dry

    Conceptual task illustration; not your device
    Conceptual illustration. Follow the text and your model's manual.

    Clean with a soft sponge for the labelled time. Rinse thoroughly and dry with a squeegee. Do not apply another product over residue from the first.

    Expected result: Removable deposits are gone and the glass is rinsed and dry.

    About 4 min

    Stop if: The marks cannot be removed without aggressive abrasion.

  5. 5

    Check the outcome and save your notes

    Conceptual task illustration; not your device
    Conceptual illustration. Follow the text and your model's manual.

    Restore parts to their normal position as instructed. Perform one brief, safe check. Note what changed after each task; if the fault remains, give a technician the model and a photo of the symptom.

    Expected result: The symptom has stopped or you have clear notes for a technician.

    About 3 min

    Stop if: Cracked glass, damaged coatings or loose enclosure fittings require a professional assessment.

When should you call a professional?

Cracked glass, damaged coatings or loose enclosure fittings require a professional assessment.

Does your situation look different?

Take a photo — FIXIT will assess your fault and suggest checks for your situation.

Check your problem

This guide is for information only. If unsure, get professional help. In an emergency, call 112.