Watering nozzle — trigger stays pressed
Check the lock after shutting off water.
Difficulty
Easy
Time
5–25 min
Cost
—
Symptoms
- garden nozzle keeps spraying
Possible causes
1Trigger lock engaged or contamination
Less likelyThis is a possible explanation, not a confirmed diagnosis. Compare it with the safe checks below.
- Close the tap and point safely to release residual pressure as instructed.
Initial checks
- Close the tap and point safely to release residual pressure as instructed.
- Compare the lock position with the manual. Release it gently and check trigger movement without pressure.
- Remove grit with a soft brush and water as permitted. Reconnect and check at low flow.
Step-by-step repair instructions
- 1
Prepare a safe place

Reference diagram. The marker shows an example inspection area. Follow your model's manual. 
Conceptual illustration. Follow the text and your model's manual. Stop garden equipment and disconnect its energy source as instructed. Do not reach under guards or near blades. Choose a dry, stable place.
Expected result: You understand the model instructions and can safely perform the listed tasks.
About 3 min
Stop if: The model, access or safe preparation is unclear.
- 2
Shut off supply

Reference diagram. The marker shows an example inspection area. Follow your model's manual. 
Conceptual illustration. Follow the text and your model's manual. Close the tap and point safely to release residual pressure as instructed.
Expected result: The hose is depressurised.
About 4 min
Stop if: Supply cannot be shut off.
- 3
Identify the lock

Reference diagram. The marker shows an example inspection area. Follow your model's manual. 
Conceptual illustration. Follow the text and your model's manual. Compare the lock position with the manual. Release it gently and check trigger movement without pressure.
Expected result: The trigger returns freely.
About 4 min
Stop if: The housing is cracked or spring does not return.
- 4
Clean the external pivot

Reference diagram. The marker shows an example inspection area. Follow your model's manual. 
Conceptual illustration. Follow the text and your model's manual. Remove grit with a soft brush and water as permitted. Reconnect and check at low flow.
Expected result: Flow stops when released.
About 4 min
Stop if: Flow continues after release.
- 5
Check the outcome and save your notes

Reference diagram. The marker shows an example inspection area. Follow your model's manual. 
Conceptual illustration. Follow the text and your model's manual. Restore parts to their normal position as instructed. Perform one brief, safe check. Note what changed after each task; if the fault remains, give a technician the model and a photo of the symptom.
Expected result: The symptom has stopped or you have clear notes for a technician.
About 3 min
Stop if: A damaged valve or spring needs a compatible part or replacement nozzle. Do not leave supply open.
When should you call a professional?
A damaged valve or spring needs a compatible part or replacement nozzle. Do not leave supply open.
Does your situation look different?
Take a photo — FIXIT will assess your fault and suggest checks for your situation.
Check your problemThis guide is for information only. If unsure, get professional help. In an emergency, call 112.