Exercise ball — correct inflation
Check size markings, inflation instructions and surface condition. Do not guess permissible pressure by feel.
Difficulty
Easy
Time
5–25 min
Cost
—
Symptoms
- exercise ball feels too soft
- pump does not fit the exercise ball
Possible causes
1Incorrect pump fitting
Less likelyThis is a possible explanation, not a confirmed diagnosis. Compare it with the safe checks below.
- Find the size, use limits and ball instructions. Inspect the surface without sitting on it.
2Inflation differs from instructions
Less likelyThis is a possible explanation, not a confirmed diagnosis. Compare it with the safe checks below.
- Use an approved pump and fitting. Do not connect an arbitrary compressor or sharp needle.
3Damaged plug or surface
Less likelyThis is a possible explanation, not a confirmed diagnosis. Compare it with the safe checks below.
- Inflate in stages, checking the manual's dimension or other criterion. Do not exceed limits or test leakage by jumping onto the ball.
Initial checks
- Find the size, use limits and ball instructions. Inspect the surface without sitting on it.
- Use an approved pump and fitting. Do not connect an arbitrary compressor or sharp needle.
- Inflate in stages, checking the manual's dimension or other criterion. Do not exceed limits or test leakage by jumping onto the ball.
Step-by-step repair instructions
- 1
Prepare a safe place

Conceptual illustration. Follow the text and your model's manual. Find the manual and model identifier. Photograph the initial condition. Start with reversible checks that do not open the casing or require force.
Expected result: You understand the model instructions and can safely perform the listed tasks.
About 3 min
Stop if: The model, access or safe preparation is unclear.
- 2
Read the markings

Conceptual illustration. Follow the text and your model's manual. Find the size, use limits and ball instructions. Inspect the surface without sitting on it.
Expected result: You know this model's inflation procedure.
About 4 min
Stop if: There is a cut, bulge or delamination.
- 3
Choose the correct fitting

Conceptual illustration. Follow the text and your model's manual. Use an approved pump and fitting. Do not connect an arbitrary compressor or sharp needle.
Expected result: The fitting matches the valve.
About 4 min
Stop if: The valve is damaged or the correct fitting is unavailable.
- 4
Inflate within documented limits

Conceptual illustration. Follow the text and your model's manual. Inflate in stages, checking the manual's dimension or other criterion. Do not exceed limits or test leakage by jumping onto the ball.
Expected result: The ball meets the manufacturer's criterion and is sealed.
About 4 min
Stop if: Air continuously escapes or the surface deforms locally.
- 5
Check the outcome and save your notes

Conceptual illustration. Follow the text and your model's manual. Restore parts to their normal position as instructed. Perform one brief, safe check. Note what changed after each task; if the fault remains, give a technician the model and a photo of the symptom.
Expected result: The symptom has stopped or you have clear notes for a technician.
About 3 min
Stop if: Take a damaged ball or plug out of use. Confirm replacement or permitted repair with the manufacturer.
When should you call a professional?
Take a damaged ball or plug out of use. Confirm replacement or permitted repair with the manufacturer.
Does your situation look different?
Take a photo — FIXIT will assess your fault and suggest checks for your situation.
Check your problemThis guide is for information only. If unsure, get professional help. In an emergency, call 112.