FiXITAI
All guides
Sports equipmentLow risk

Swimming goggles fog after washing

Check lens care without abrading the coating.

Difficulty

Easy

Time

5–25 min

Cost

—

Symptoms

  • lenses fog inside

Possible causes

  1. 1Contamination or worn anti-fog coating

    Less likely

    This is a possible explanation, not a confirmed diagnosis. Compare it with the safe checks below.

    • Out of the water inspect cracks, deposits and seals. Do not test visibility while swimming.

Initial checks

  • Out of the water inspect cracks, deposits and seals. Do not test visibility while swimming.
  • Rinse with clean water at the permitted temperature. Do not rub the inside if the manufacturer protects the coating.
  • Air-dry in shade. Use anti-fog treatment only if approved. Check visibility out of the water.

Step-by-step repair instructions

  1. 1

    Prepare a safe place

    Prepare a safe place
    Reference diagram. The marker shows an example inspection area. Follow your model's manual.
    Conceptual task illustration; not your device
    Conceptual illustration. Follow the text and your model's manual.

    Find the manual and model identifier. Photograph the initial condition. Start with reversible checks that do not open the casing or require force.

    Expected result: You understand the model instructions and can safely perform the listed tasks.

    About 3 min

    Stop if: The model, access or safe preparation is unclear.

  2. 2

    Inspect the lenses

    Inspect the lenses
    Reference diagram. The marker shows an example inspection area. Follow your model's manual.
    Conceptual task illustration; not your device
    Conceptual illustration. Follow the text and your model's manual.

    Out of the water inspect cracks, deposits and seals. Do not test visibility while swimming.

    Expected result: You know whether the lens is intact.

    About 4 min

    Stop if: A lens is cracked or seal displaced.

  3. 3

    Rinse as instructed

    Rinse as instructed
    Reference diagram. The marker shows an example inspection area. Follow your model's manual.
    Conceptual task illustration; not your device
    Conceptual illustration. Follow the text and your model's manual.

    Rinse with clean water at the permitted temperature. Do not rub the inside if the manufacturer protects the coating.

    Expected result: Loose residue is removed.

    About 4 min

    Stop if: The coating peels.

  4. 4

    Dry without heat

    Dry without heat
    Reference diagram. The marker shows an example inspection area. Follow your model's manual.
    Conceptual task illustration; not your device
    Conceptual illustration. Follow the text and your model's manual.

    Air-dry in shade. Use anti-fog treatment only if approved. Check visibility out of the water.

    Expected result: The lenses are clear.

    About 4 min

    Stop if: Fogging prevents clear vision.

  5. 5

    Check the outcome and save your notes

    Check the outcome and save your notes
    Reference diagram. The marker shows an example inspection area. Follow your model's manual.
    Conceptual task illustration; not your device
    Conceptual illustration. Follow the text and your model's manual.

    Restore parts to their normal position as instructed. Perform one brief, safe check. Note what changed after each task; if the fault remains, give a technician the model and a photo of the symptom.

    Expected result: The symptom has stopped or you have clear notes for a technician.

    About 3 min

    Stop if: Replace damaged or persistently unclear goggles. Do not use with impaired vision.

When should you call a professional?

Replace damaged or persistently unclear goggles. Do not use with impaired vision.

Does your situation look different?

Take a photo — FIXIT will assess your fault and suggest checks for your situation.

Check your problem

This guide is for information only. If unsure, get professional help. In an emergency, call 112.