FiXITAI
All guides
PlumbingLow risk

Bath tap — shower diverter will not stay selected

Check diverter operation and supply.

Difficulty

Easy

Time

5–25 min

Cost

—

Symptoms

  • water returns to the spout

Possible causes

  1. 1Pressure-dependent operation or deposits

    Less likely

    This is a possible explanation, not a confirmed diagnosis. Compare it with the safe checks below.

    • Check whether returning when water stops is normal for the design. Do not force it in position.

Initial checks

  • Check whether returning when water stops is normal for the design. Do not force it in position.
  • Shut off water and wipe accessible deposits with a soft cloth. Use an approved product without mixing chemicals.
  • Try once at a safe temperature. Note whether other taps also have low flow.

Step-by-step repair instructions

  1. 1

    Prepare a safe place

    Prepare a safe place
    Reference diagram. The marker shows an example inspection area. Follow your model's manual.
    Conceptual task illustration; not your device
    Conceptual illustration. Follow the text and your model's manual.

    Locate the water shut-off. If a task requires disconnecting a part, shut off the water and release pressure as instructed first. Do not work around water near electrical equipment.

    Expected result: You understand the model instructions and can safely perform the listed tasks.

    About 3 min

    Stop if: The model, access or safe preparation is unclear.

  2. 2

    Compare with the manual

    Compare with the manual
    Reference diagram. The marker shows an example inspection area. Follow your model's manual.
    Conceptual task illustration; not your device
    Conceptual illustration. Follow the text and your model's manual.

    Check whether returning when water stops is normal for the design. Do not force it in position.

    Expected result: You know the intended behaviour.

    About 4 min

    Stop if: Water is too hot or leaking.

  3. 3

    Clean the exterior

    Clean the exterior
    Reference diagram. The marker shows an example inspection area. Follow your model's manual.
    Conceptual task illustration; not your device
    Conceptual illustration. Follow the text and your model's manual.

    Shut off water and wipe accessible deposits with a soft cloth. Use an approved product without mixing chemicals.

    Expected result: The diverter exterior is free of residue.

    About 4 min

    Stop if: The finish is being damaged.

  4. 4

    Check normal flow

    Check normal flow
    Reference diagram. The marker shows an example inspection area. Follow your model's manual.
    Conceptual task illustration; not your device
    Conceptual illustration. Follow the text and your model's manual.

    Try once at a safe temperature. Note whether other taps also have low flow.

    Expected result: You have a description of flow and operation.

    About 4 min

    Stop if: Water leaks behind the tap or the diverter jams.

  5. 5

    Check the outcome and save your notes

    Check the outcome and save your notes
    Reference diagram. The marker shows an example inspection area. Follow your model's manual.
    Conceptual task illustration; not your device
    Conceptual illustration. Follow the text and your model's manual.

    Restore parts to their normal position as instructed. Perform one brief, safe check. Note what changed after each task; if the fault remains, give a technician the model and a photo of the symptom.

    Expected result: The symptom has stopped or you have clear notes for a technician.

    About 3 min

    Stop if: Do not dismantle a pressurised body. Persistent problems require a plumber.

When should you call a professional?

Do not dismantle a pressurised body. Persistent problems require a plumber.

Does your situation look different?

Take a photo — FIXIT will assess your fault and suggest checks for your situation.

Check your problem

This guide is for information only. If unsure, get professional help. In an emergency, call 112.