FiXITAI
All guides
ToolsLow risk

Adjustable wrench — jaws slip off a nut

Check fit on an unloaded fixing.

Difficulty

Easy

Time

5–25 min

Cost

—

Symptoms

  • wrench feels loose on a nut

Possible causes

  1. 1Excessive opening or worn jaws

    Less likely

    This is a possible explanation, not a confirmed diagnosis. Compare it with the safe checks below.

    • Clean the wrench and inspect jaws and adjustment screw. Work only on a fixing permitted by the item's manual.

Initial checks

  • Clean the wrench and inspect jaws and adjustment screw. Work only on a fixing permitted by the item's manual.
  • Close the jaw onto the nut flats, not corners. Prefer a correctly sized fixed wrench when available.
  • Hold as instructed. Do not extend the handle with a pipe. Stop immediately if a jaw begins slipping.

Step-by-step repair instructions

  1. 1

    Prepare a safe place

    Prepare a safe place
    Reference diagram. The marker shows an example inspection area. Follow your model's manual.
    Conceptual task illustration; not your device
    Conceptual illustration. Follow the text and your model's manual.

    Switch off the tool and unplug it or remove its battery as instructed. Keep away from blades. Work only on parts identified as user-serviceable.

    Expected result: You understand the model instructions and can safely perform the listed tasks.

    About 3 min

    Stop if: The model, access or safe preparation is unclear.

  2. 2

    Inspect the tool

    Inspect the tool
    Reference diagram. The marker shows an example inspection area. Follow your model's manual.
    Conceptual task illustration; not your device
    Conceptual illustration. Follow the text and your model's manual.

    Clean the wrench and inspect jaws and adjustment screw. Work only on a fixing permitted by the item's manual.

    Expected result: The jaws are not cracked.

    About 4 min

    Stop if: The wrench is bent or adjustment skips.

  3. 3

    Match the opening

    Match the opening
    Reference diagram. The marker shows an example inspection area. Follow your model's manual.
    Conceptual task illustration; not your device
    Conceptual illustration. Follow the text and your model's manual.

    Close the jaw onto the nut flats, not corners. Prefer a correctly sized fixed wrench when available.

    Expected result: Jaws fit the flats.

    About 4 min

    Stop if: The nut is rounded or inaccessible.

  4. 4

    Check with light pressure

    Check with light pressure
    Reference diagram. The marker shows an example inspection area. Follow your model's manual.
    Conceptual task illustration; not your device
    Conceptual illustration. Follow the text and your model's manual.

    Hold as instructed. Do not extend the handle with a pipe. Stop immediately if a jaw begins slipping.

    Expected result: The tool stays seated.

    About 4 min

    Stop if: The nut requires high force.

  5. 5

    Check the outcome and save your notes

    Check the outcome and save your notes
    Reference diagram. The marker shows an example inspection area. Follow your model's manual.
    Conceptual task illustration; not your device
    Conceptual illustration. Follow the text and your model's manual.

    Restore parts to their normal position as instructed. Perform one brief, safe check. Note what changed after each task; if the fault remains, give a technician the model and a photo of the symptom.

    Expected result: The symptom has stopped or you have clear notes for a technician.

    About 3 min

    Stop if: Retire a worn wrench. Leave service connections and torque-critical fixings to a qualified professional.

When should you call a professional?

Retire a worn wrench. Leave service connections and torque-critical fixings to a qualified professional.

Does your situation look different?

Take a photo — FIXIT will assess your fault and suggest checks for your situation.

Check your problem

This guide is for information only. If unsure, get professional help. In an emergency, call 112.