FiXITAI
All guides
Sports equipmentLow risk

Trekking pole shortens under light pressure

Check the lock without putting body weight on it.

Difficulty

Easy

Time

5–25 min

Cost

—

Symptoms

  • pole length lock will not hold

Possible causes

  1. 1Incorrectly closed lock or dirty joint

    Less likely

    This is a possible explanation, not a confirmed diagnosis. Compare it with the safe checks below.

    • Lay the pole on a table and compare the lock with its manual. Find the maximum-extension mark.

Initial checks

  • Lay the pole on a table and compare the lock with its manual. Find the maximum-extension mark.
  • Clean and dry only as directed. Do not lubricate clamping surfaces or extend beyond the permitted range.
  • Set length below the limit and lock as instructed. Check light hand pressure away from your face without leaning on it.

Step-by-step repair instructions

  1. 1

    Prepare a safe place

    Prepare a safe place
    Reference diagram. The marker shows an example inspection area. Follow your model's manual.
    Conceptual task illustration; not your device
    Conceptual illustration. Follow the text and your model's manual.

    Find the manual and model identifier. Photograph the initial condition. Start with reversible checks that do not open the casing or require force.

    Expected result: You understand the model instructions and can safely perform the listed tasks.

    About 3 min

    Stop if: The model, access or safe preparation is unclear.

  2. 2

    Unload the pole

    Unload the pole
    Reference diagram. The marker shows an example inspection area. Follow your model's manual.
    Conceptual task illustration; not your device
    Conceptual illustration. Follow the text and your model's manual.

    Lay the pole on a table and compare the lock with its manual. Find the maximum-extension mark.

    Expected result: You know the permitted range.

    About 4 min

    Stop if: The tube is bent or cracked.

  3. 3

    Clean the accessible joint

    Clean the accessible joint
    Reference diagram. The marker shows an example inspection area. Follow your model's manual.
    Conceptual task illustration; not your device
    Conceptual illustration. Follow the text and your model's manual.

    Clean and dry only as directed. Do not lubricate clamping surfaces or extend beyond the permitted range.

    Expected result: The joint is dry and clean.

    About 4 min

    Stop if: A locking part is damaged.

  4. 4

    Close the lock

    Close the lock
    Reference diagram. The marker shows an example inspection area. Follow your model's manual.
    Conceptual task illustration; not your device
    Conceptual illustration. Follow the text and your model's manual.

    Set length below the limit and lock as instructed. Check light hand pressure away from your face without leaning on it.

    Expected result: Length stays fixed.

    About 4 min

    Stop if: The pole still collapses.

  5. 5

    Check the outcome and save your notes

    Check the outcome and save your notes
    Reference diagram. The marker shows an example inspection area. Follow your model's manual.
    Conceptual task illustration; not your device
    Conceptual illustration. Follow the text and your model's manual.

    Restore parts to their normal position as instructed. Perform one brief, safe check. Note what changed after each task; if the fault remains, give a technician the model and a photo of the symptom.

    Expected result: The symptom has stopped or you have clear notes for a technician.

    About 3 min

    Stop if: Do not use a faulty pole for support. Arrange maker-approved repair or replacement.

When should you call a professional?

Do not use a faulty pole for support. Arrange maker-approved repair or replacement.

Does your situation look different?

Take a photo — FIXIT will assess your fault and suggest checks for your situation.

Check your problem

This guide is for information only. If unsure, get professional help. In an emergency, call 112.