Intercom — excessive wind noise
Check microphone position while stopped.
Difficulty
Easy
Time
5–25 min
Cost
—
Symptoms
- caller mainly hears wind
Possible causes
1Incorrect microphone positioning
Less likelyThis is a possible explanation, not a confirmed diagnosis. Compare it with the safe checks below.
- Switch off and check the specified microphone position. Inspect its foam and bracket without dismantling the protective liner.
Initial checks
- Switch off and check the specified microphone position. Inspect its foam and bracket without dismantling the protective liner.
- Adjust distance and orientation using the markings. Fit the specified wind cover. Do not push wires behind EPS.
- In a quiet place record your own voice briefly. Check noise reduction in the manufacturer's app. Do not operate the phone while riding.
Step-by-step repair instructions
- 1
Prepare a safe place

Reference diagram. The marker shows an example inspection area. Follow your model's manual. 
Conceptual illustration. Follow the text and your model's manual. Place the motorcycle securely on level ground, stop the engine and put the key aside. Do not work in traffic or near hot parts.
Expected result: You understand the model instructions and can safely perform the listed tasks.
About 3 min
Stop if: The model, access or safe preparation is unclear.
- 2
Inspect microphone cover

Reference diagram. The marker shows an example inspection area. Follow your model's manual. 
Conceptual illustration. Follow the text and your model's manual. Switch off and check the specified microphone position. Inspect its foam and bracket without dismantling the protective liner.
Expected result: The cover is intact and correctly placed.
About 4 min
Stop if: The bracket obstructs fastening or visor movement.
- 3
Position as instructed

Reference diagram. The marker shows an example inspection area. Follow your model's manual. 
Conceptual illustration. Follow the text and your model's manual. Adjust distance and orientation using the markings. Fit the specified wind cover. Do not push wires behind EPS.
Expected result: The microphone is correctly positioned.
About 4 min
Stop if: Drilling or modifying the helmet would be necessary.
- 4
Compare a stationary recording

Reference diagram. The marker shows an example inspection area. Follow your model's manual. 
Conceptual illustration. Follow the text and your model's manual. In a quiet place record your own voice briefly. Check noise reduction in the manufacturer's app. Do not operate the phone while riding.
Expected result: Voice is intelligible in quiet conditions.
About 4 min
Stop if: Crackling persists without wind.
- 5
Check the outcome and save your notes

Reference diagram. The marker shows an example inspection area. Follow your model's manual. 
Conceptual illustration. Follow the text and your model's manual. Restore parts to their normal position as instructed. Perform one brief, safe check. Note what changed after each task; if the fault remains, give a technician the model and a photo of the symptom.
Expected result: The symptom has stopped or you have clear notes for a technician.
About 3 min
Stop if: A damaged microphone or cable needs a compatible part. Do not alter the helmet structure.
When should you call a professional?
A damaged microphone or cable needs a compatible part. Do not alter the helmet structure.
Does your situation look different?
Take a photo — FIXIT will assess your fault and suggest checks for your situation.
Check your problemThis guide is for information only. If unsure, get professional help. In an emergency, call 112.