USB hub — accessories disconnect
Check power, cables and device compatibility. Do not use an arbitrary power supply with a hub.
Difficulty
Easy
Time
5–25 min
Cost
—
Symptoms
- accessories disappear through the hub
- hub works with only one device
Possible causes
1Hub capabilities are exceeded
Less likelyThis is a possible explanation, not a confirmed diagnosis. Compare it with the safe checks below.
- Check the hub, computer and accessory manuals. Identify ports supporting data, video and required power.
2Incompatible cable or port
Less likelyThis is a possible explanation, not a confirmed diagnosis. Compare it with the safe checks below.
- Safely eject storage devices in the OS before unplugging. Compare one accessory connected directly to the computer and through the hub.
3Required power is missing
Less likelyThis is a possible explanation, not a confirmed diagnosis. Compare it with the safe checks below.
- Use only a power supply and cable approved for the hub. Do not combine power sources in an undocumented way.
Initial checks
- Check the hub, computer and accessory manuals. Identify ports supporting data, video and required power.
- Safely eject storage devices in the OS before unplugging. Compare one accessory connected directly to the computer and through the hub.
- Use only a power supply and cable approved for the hub. Do not combine power sources in an undocumented way.
Step-by-step repair instructions
- 1
Prepare a safe place

Conceptual illustration. Follow the text and your model's manual. Find the manual and model identifier. Photograph the initial condition. Start with reversible checks that do not open the casing or require force.
Expected result: You understand the model instructions and can safely perform the listed tasks.
About 3 min
Stop if: The model, access or safe preparation is unclear.
- 2
Check requirements

Conceptual illustration. Follow the text and your model's manual. Check the hub, computer and accessory manuals. Identify ports supporting data, video and required power.
Expected result: Connections match their documented functions.
About 4 min
Stop if: Power-supply ratings are unknown or a cable is damaged.
- 3
Compare one device

Conceptual illustration. Follow the text and your model's manual. Safely eject storage devices in the OS before unplugging. Compare one accessory connected directly to the computer and through the hub.
Expected result: You know whether the hub causes the problem.
About 4 min
Stop if: Data is being written or ejecting failed.
- 4
Check the specified power source

Conceptual illustration. Follow the text and your model's manual. Use only a power supply and cable approved for the hub. Do not combine power sources in an undocumented way.
Expected result: The setup operates within its specified capabilities.
About 4 min
Stop if: The hub or connector heats unusually or smells of burning.
- 5
Check the outcome and save your notes

Conceptual illustration. Follow the text and your model's manual. Restore parts to their normal position as instructed. Perform one brief, safe check. Note what changed after each task; if the fault remains, give a technician the model and a photo of the symptom.
Expected result: The symptom has stopped or you have clear notes for a technician.
About 3 min
Stop if: Connector damage, unusual heat or failure with one compatible device requires hub service.
When should you call a professional?
Connector damage, unusual heat or failure with one compatible device requires hub service.
Does your situation look different?
Take a photo — FIXIT will assess your fault and suggest checks for your situation.
Check your problemThis guide is for information only. If unsure, get professional help. In an emergency, call 112.