Interior door — squeaking hinges
Inspect an ordinary interior door for play and rubbing. Fire doors and heavy door leaves require professional service.
Difficulty
Easy
Time
5–25 min
Cost
—
Symptoms
- door squeaks when opening
- squeak near a hinge
Possible causes
1Dirty hinge
Less likelyThis is a possible explanation, not a confirmed diagnosis. Compare it with the safe checks below.
- Move an ordinary door slowly and locate the noise. Inspect visible screws and frame rubbing without removing the door leaf.
2Insufficient lubrication
Less likelyThis is a possible explanation, not a confirmed diagnosis. Compare it with the safe checks below.
- Wipe the accessible hinge with a soft cloth. Do not drive out pins or use products that could damage the finish.
3Wear or loose mounting
Less likelyThis is a possible explanation, not a confirmed diagnosis. Compare it with the safe checks below.
- If the manufacturer permits lubrication without disassembly, apply a small amount of the specified product at the indicated point. Wipe away excess and move the door.
Initial checks
- Move an ordinary door slowly and locate the noise. Inspect visible screws and frame rubbing without removing the door leaf.
- Wipe the accessible hinge with a soft cloth. Do not drive out pins or use products that could damage the finish.
- If the manufacturer permits lubrication without disassembly, apply a small amount of the specified product at the indicated point. Wipe away excess and move the door.
Step-by-step repair instructions
- 1
Prepare a safe place

Conceptual illustration. Follow the text and your model's manual. Find the manual and model identifier. Photograph the initial condition. Start with reversible checks that do not open the casing or require force.
Expected result: You understand the model instructions and can safely perform the listed tasks.
About 3 min
Stop if: The model, access or safe preparation is unclear.
- 2
Inspect the mounting

Conceptual illustration. Follow the text and your model's manual. Move an ordinary door slowly and locate the noise. Inspect visible screws and frame rubbing without removing the door leaf.
Expected result: You can identify the hinge or rubbing point.
About 4 min
Stop if: The leaf is sagging, a mounting is pulling away, or this is a fire door.
- 3
Remove surface dirt

Conceptual illustration. Follow the text and your model's manual. Wipe the accessible hinge with a soft cloth. Do not drive out pins or use products that could damage the finish.
Expected result: Loose dirt has been removed from the accessible surface.
About 4 min
Stop if: The hinge is cracked or corroded.
- 4
Use the specified lubricant

Conceptual illustration. Follow the text and your model's manual. If the manufacturer permits lubrication without disassembly, apply a small amount of the specified product at the indicated point. Wipe away excess and move the door.
Expected result: The door moves more smoothly without contaminating surfaces.
About 4 min
Stop if: The hinge type is unknown or the door still rubs.
- 5
Check the outcome and save your notes

Conceptual illustration. Follow the text and your model's manual. Restore parts to their normal position as instructed. Perform one brief, safe check. Note what changed after each task; if the fault remains, give a technician the model and a photo of the symptom.
Expected result: The symptom has stopped or you have clear notes for a technician.
About 3 min
Stop if: Sagging, a loose frame or a safety-rated door requires appropriate professional service.
When should you call a professional?
Sagging, a loose frame or a safety-rated door requires appropriate professional service.
Does your situation look different?
Take a photo — FIXIT will assess your fault and suggest checks for your situation.
Check your problemThis guide is for information only. If unsure, get professional help. In an emergency, call 112.