Electric kettle — deposits on the bottom
Descale only by the manufacturer's method and never immerse the base or electrical parts.
Difficulty
Easy
Time
5–25 min
Cost
—
Symptoms
- white deposits on the kettle bottom
- flakes of deposit in the water
Possible causes
1Hard-water deposits
Less likelyThis is a possible explanation, not a confirmed diagnosis. Compare it with the safe checks below.
- Read the kettle manual and product label. Do not assume vinegar or acids are approved for every model.
2Infrequent descaling
Less likelyThis is a possible explanation, not a confirmed diagnosis. Compare it with the safe checks below.
- Once cool, descale exactly as instructed. Keep water and product away from the base, cord and connectors.
3A dirty spout filter
Less likelyThis is a possible explanation, not a confirmed diagnosis. Compare it with the safe checks below.
- Rinse and perform the clean-water cycles specified by the manufacturer. Remove a filter only by the documented method.
Initial checks
- Read the kettle manual and product label. Do not assume vinegar or acids are approved for every model.
- Once cool, descale exactly as instructed. Keep water and product away from the base, cord and connectors.
- Rinse and perform the clean-water cycles specified by the manufacturer. Remove a filter only by the documented method.
Step-by-step repair instructions
- 1
Prepare a safe place

Conceptual illustration. Follow the text and your model's manual. Stop the appliance. Clean it only after safely disconnecting power and allowing it to cool. Identify user-serviceable parts in the model's manual.
Expected result: You understand the model instructions and can safely perform the listed tasks.
About 3 min
Stop if: The model, access or safe preparation is unclear.
- 2
Choose the approved method

Conceptual illustration. Follow the text and your model's manual. Read the kettle manual and product label. Do not assume vinegar or acids are approved for every model.
Expected result: The product concentration and contact time are known.
About 4 min
Stop if: The interior is corroded or the kettle leaks.
- 3
Remove deposits

Conceptual illustration. Follow the text and your model's manual. Once cool, descale exactly as instructed. Keep water and product away from the base, cord and connectors.
Expected result: Deposits loosen without scraping the heating surface.
About 4 min
Stop if: A leak, crack or unusual smell appears.
- 4
Rinse thoroughly

Conceptual illustration. Follow the text and your model's manual. Rinse and perform the clean-water cycles specified by the manufacturer. Remove a filter only by the documented method.
Expected result: No descaler residue remains in the water.
About 4 min
Stop if: The kettle does not switch off automatically.
- 5
Check the outcome and save your notes

Conceptual illustration. Follow the text and your model's manual. Restore parts to their normal position as instructed. Perform one brief, safe check. Note what changed after each task; if the fault remains, give a technician the model and a photo of the symptom.
Expected result: The symptom has stopped or you have clear notes for a technician.
About 3 min
Stop if: A leak, damaged cord or failure to switch off means the kettle must be taken out of use and serviced.
When should you call a professional?
A leak, damaged cord or failure to switch off means the kettle must be taken out of use and serviced.
Does your situation look different?
Take a photo — FIXIT will assess your fault and suggest checks for your situation.
Check your problemThis guide is for information only. If unsure, get professional help. In an emergency, call 112.