Sports bottle — mouthpiece is hard to close
Clean only parts identified as removable.
Difficulty
Easy
Time
5–25 min
Cost
—
Symptoms
- bottle mouthpiece sticks
Possible causes
1Dried drink residue on an accessible part
Less likelyThis is a possible explanation, not a confirmed diagnosis. Compare it with the safe checks below.
- Empty and open normally. Check mouthpiece and seal instructions. Do not open a pressurised container.
Initial checks
- Empty and open normally. Check mouthpiece and seal instructions. Do not open a pressurised container.
- Remove permitted parts only. Wash with an approved product and brush, rinse thoroughly and dry.
- Refit the seal as shown. Test a small amount of cool water over a sink before putting it in a bag.
Step-by-step repair instructions
- 1
Prepare a safe place

Reference diagram. The marker shows an example inspection area. Follow your model's manual. 
Conceptual illustration. Follow the text and your model's manual. Find the manual and model identifier. Photograph the initial condition. Start with reversible checks that do not open the casing or require force.
Expected result: You understand the model instructions and can safely perform the listed tasks.
About 3 min
Stop if: The model, access or safe preparation is unclear.
- 2
Empty the bottle

Reference diagram. The marker shows an example inspection area. Follow your model's manual. 
Conceptual illustration. Follow the text and your model's manual. Empty and open normally. Check mouthpiece and seal instructions. Do not open a pressurised container.
Expected result: The bottle is empty and unpressurised.
About 4 min
Stop if: The lid bulges.
- 3
Wash the correct parts

Reference diagram. The marker shows an example inspection area. Follow your model's manual. 
Conceptual illustration. Follow the text and your model's manual. Remove permitted parts only. Wash with an approved product and brush, rinse thoroughly and dry.
Expected result: Washable passages are clean.
About 4 min
Stop if: Material is cracked or deposits persist.
- 4
Reassemble and test with cool water

Reference diagram. The marker shows an example inspection area. Follow your model's manual. 
Conceptual illustration. Follow the text and your model's manual. Refit the seal as shown. Test a small amount of cool water over a sink before putting it in a bag.
Expected result: The mouthpiece closes without leaking.
About 4 min
Stop if: The seal comes out or water leaks.
- 5
Check the outcome and save your notes

Reference diagram. The marker shows an example inspection area. Follow your model's manual. 
Conceptual illustration. Follow the text and your model's manual. Restore parts to their normal position as instructed. Perform one brief, safe check. Note what changed after each task; if the fault remains, give a technician the model and a photo of the symptom.
Expected result: The symptom has stopped or you have clear notes for a technician.
About 3 min
Stop if: Replace a cracked mouthpiece or uncleanable part. Do not apply adhesive to drink-contact surfaces.
When should you call a professional?
Replace a cracked mouthpiece or uncleanable part. Do not apply adhesive to drink-contact surfaces.
Does your situation look different?
Take a photo — FIXIT will assess your fault and suggest checks for your situation.
Check your problemThis guide is for information only. If unsure, get professional help. In an emergency, call 112.